132kV Resident Engineer

• →To act as a registered competent person and advisor for the company on Electricity Supply Act 447 and Electricity Regulation 1994. Responsible to ensure compliance to the stipulated act and perform the full duty of a 132kV resident engineer as stipulated in the act. 
• →Liaison between owner and energy commission in any mode of communications including the submission of weekly Borang I to ST
• →Responsible to sign IOM between owner and TNB
• →To liaise with National Load Dispatch Center (NLDC), GSO, TNB and ST for any switching required. 
• →Advice and assist in the establishment of the Emergency Response Plan and Emergency Remedial and Recovery Action Plan. 
• →Monitor, review and analyze any alarms & guide the engineers to update FMEA & electrical risk assessment. 
• →To perform weekly inspection of 132kV installations and submit report to Energy Commission.
• →Liaise with TNB, NLDC and local authorities, legal & ESH related to power supply outage and plan shutdown maintenance, activities pertaining to electrical and HV power distribution system. To attend to power supply interruption and breakdown. 
• →Review & advise on Permit to Work for electrical projects and maintenance. To ensure all safety standards are complied. 
• →Ensure all maintenance and operations programs are properly implemented in order to have optimum and sustainable performances (approximate to designed performances) of all installations included in the limit of scope, complying with all legal requirement and internal control limit 
• →Work closely with Facility Operations Manager to review day to day operation, audit & evaluate all the electrical installation to ensure comply with the act but not limited to:

High & Medium Voltage Distribution : 

• →132kV switchgear and Breakers
• →11kV Switchgears and Breakers
• →Transformers
• →Protection relays
• →Electrical testing & commissioning (TTR, insulation resistance, Power Factor Insulation,Dissolved Gas Analysis, Dielectric Breakdown Voltage, Circuit Breaker Testing, Protective Relay Calibration)

Low Voltage System

• →Power System Study (Short Circuit, Coordination, Arc Flash)
• →Power System and Controls single-line diagram interpretation
• →Semi-conductor factory power supply distributions
• →Emergency generators system
• →UPS (Uninterruptible Power Supply) system
• →VSC (Voltage Sag Correctors)
• →VFD (Variable-speed drives)
• →Transfer Switches - ATS (Automatic Transfer Switch) or CTTS (Closed Transition Transfer Switch)

• →Oversee & guide Chargemens of the site on the day to day operations & PM activity 
• →Oversee on other installation (CDA, HVAC & others) and provide advise/suggestion for improvement in the area of design, energy efficiency, maintenance & operations 
• →Ensure all relevant law statues and regulation relating to electrical system and installation are comply with 
• →Involve in system optimization in term of energy, maintenance & operation to contribute on green initiatives 
• →To review & advise all the project design and commissioning as per the act. 
• →Carry out other duties or responsibilities assigned from time to time. 
• →Communicate effectively with team members & stakeholders. 
• →In the event of an emergency, the Resident Engineer shall be required to reach the site within specific required timeframe based on the site requirement, to support the efficient recovery of the site. 

• Degree in Electrical Engineering registered with BEM. 
• Registered professional Electrical Engineer with BEM including signing authority. 
• Minimum of 10 years knowledge in Manufacturing industry and 5 years of knowledge in 132kV operations. 
• Registered with Energy Commission of Malaysia as a 132kV Competent Engineer (JEK).