E&I Tech Journeyman (No Per Diem)

 Muast pass Pre Employment physical and drug screen

Job Description: Instrumentation/Electrical Technician

SUMMRY OF POSITION

Performs routine maintenance, installation and integration of several types of process control instrumentation equipment such as transmitters, controllers, integrators, recorders, process and analytical machinery. Perform with tools of the trade. Knowledge and use of electrical/Instrument tools, fluke meter etc., Make repairs to electrical power, motor and motor control circuits. Must be able to effectively communicate and speak English.

ORGANIZATIONAL RELATIONSHIPS

1. Reports to: Site Management
2. Directs: This is a non-supervisory position
3. Other: Works integrally with coworkers, customers and contractors.

EXAMPLES OF WORK

Routine maintenance which includes but is not limited to the following:

* field fault analysis -- determines if instrument has failed or if it is a process problem;

* Field calibration of instrumentation utilizing proper test equipment;

* Complete overhaul in shop environment to include component replacements, alignments and calibration to specifications of record;

* Repair of signal transmission facility such as tubing, wiring, etc.;

* Instrumentation to include pneumatic, electronic and digital equipment;

* fault analysis of hardwire relay logic, motor control circuits, motor power circuits (120V to 480V 3phase) and common utility / lighting circuits;

* installation of new control circuits, modification of existing instrument/electrical systems as requested, to include design, load and Implementation of new control logic;

* Fault analysis of PLC based systems with control logic modification if required.

* Develops, prepares and presents recommendations and reports as requested.

REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES

Must be a High School graduate or GED equivalent, demonstrate proficiency in both oral and written communication. Must have the ability to interpret schematic drawings (to component level) of pneumatic loops, hardware relay logic diagrams, PLC control programs, motor control circuit diagrams, etc. Must associate circuit symbols with actual components to include solid state electronics (transistors, integrated chips, resistors, capacitors, etc.) and common industrial electrical hardware (relays, contactors, starters, etc.). Must have good mathematical skills to include basic algebra for calculation of electrical/electronic equations. Must be able to install and bend electrical conduit of the various trade, size (pvc, emt, rigid) and install instrumentation tubing. The ability to analyze problems, identify solutions, project consequences of proposed actions and implement recommendations in support of goals. Must be able to lift and maneuver 50 pounds.

BENEFITS Brown and Root offers a selection of competitive lifestyle benefits which could include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or belis, or any other characteristics protected by federal, state, or local law.

Job Description: Instrumentation/Electrical Technician

SUMMRY OF POSITION

Performs routine maintenance, installation and integration of several types of process control instrumentation equipment such as transmitters, controllers, integrators, recorders, process and analytical machinery. Perform with tools of the trade. Knowledge and use of electrical/Instrument tools, fluke meter etc., Make repairs to electrical power, motor and motor control circuits. Must be able to effectively communicate and speak English.

ORGANIZATIONAL RELATIONSHIPS

1. Reports to: Site Management
2. Directs: This is a non-supervisory position
3. Other: Works integrally with coworkers, customers and contractors.

EXAMPLES OF WORK

Routine maintenance which includes but is not limited to the following:

* field fault analysis -- determines if instrument has failed or if it is a process problem;

* Field calibration of instrumentation utilizing proper test equipment;

* Complete overhaul in shop environment to include component replacements, alignments and calibration to specifications of record;

* Repair of signal transmission facility such as tubing, wiring, etc.;

* Instrumentation to include pneumatic, electronic and digital equipment;

* fault analysis of hardwire relay logic, motor control circuits, motor power circuits (120V to 480V 3phase) and common utility / lighting circuits;

* installation of new control circuits, modification of existing instrument/electrical systems as requested, to include design, load and Implementation of new control logic;

* Fault analysis of PLC based systems with control logic modification if required.

* Develops, prepares and presents recommendations and reports as requested.

REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES

Must be a High School graduate or GED equivalent, demonstrate proficiency in both oral and written communication. Must have the ability to interpret schematic drawings (to component level) of pneumatic loops, hardware relay logic diagrams, PLC control programs, motor control circuit diagrams, etc. Must associate circuit symbols with actual components to include solid state electronics (transistors, integrated chips, resistors, capacitors, etc.) and common industrial electrical hardware (relays, contactors, starters, etc.). Must have good mathematical skills to include basic algebra for calculation of electrical/electronic equations. Must be able to install and bend electrical conduit of the various trade, size (pvc, emt, rigid) and install instrumentation tubing. The ability to analyze problems, identify solutions, project consequences of proposed actions and implement recommendations in support of goals. Must be able to lift and maneuver 50 pounds.

BENEFITS Brown and Root offers a selection of competitive lifestyle benefits which could include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or belis, or any other characteristics protected by federal, state, or local law.

Regular Full-Time

Regular Full-Time

Regular Full-Time

Regular Full-Time

Job Description: Instrumentation/Electrical Technician

SUMMRY OF POSITION

Performs routine maintenance, installation and integration of several types of process control instrumentation equipment such as transmitters, controllers, integrators, recorders, process and analytical machinery. Perform with tools of the trade. Knowledge and use of electrical/Instrument tools, fluke meter etc., Make repairs to electrical power, motor and motor control circuits. Must be able to effectively communicate and speak English.

ORGANIZATIONAL RELATIONSHIPS

1. Reports to: Site Management
2. Directs: This is a non-supervisory position
3. Other: Works integrally with coworkers, customers and contractors.

EXAMPLES OF WORK

Routine maintenance which includes but is not limited to the following:

* field fault analysis -- determines if instrument has failed or if it is a process problem;

* Field calibration of instrumentation utilizing proper test equipment;

* Complete overhaul in shop environment to include component replacements, alignments and calibration to specifications of record;

* Repair of signal transmission facility such as tubing, wiring, etc.;

* Instrumentation to include pneumatic, electronic and digital equipment;

* fault analysis of hardwire relay logic, motor control circuits, motor power circuits (120V to 480V 3phase) and common utility / lighting circuits;

* installation of new control circuits, modification of existing instrument/electrical systems as requested, to include design, load and Implementation of new control logic;

* Fault analysis of PLC based systems with control logic modification if required.

* Develops, prepares and presents recommendations and reports as requested.

REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES

Must be a High School graduate or GED equivalent, demonstrate proficiency in both oral and written communication. Must have the ability to interpret schematic drawings (to component level) of pneumatic loops, hardware relay logic diagrams, PLC control programs, motor control circuit diagrams, etc. Must associate circuit symbols with actual components to include solid state electronics (transistors, integrated chips, resistors, capacitors, etc.) and common industrial electrical hardware (relays, contactors, starters, etc.). Must have good mathematical skills to include basic algebra for calculation of electrical/electronic equations. Must be able to install and bend electrical conduit of the various trade, size (pvc, emt, rigid) and install instrumentation tubing. The ability to analyze problems, identify solutions, project consequences of proposed actions and implement recommendations in support of goals. Must be able to lift and maneuver 50 pounds.

BENEFITS Brown and Root offers a selection of competitive lifestyle benefits which could include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or belis, or any other characteristics protected by federal, state, or local law.

E&I Tech Journeyman APPLY Maysville KY FUNCTIONAL GROUP Electrical Zip Code 41056 Job Description Job Description: Instrumentation/Electrical Technician SUMMRY OF POSITION Performs routine maintenance, installation and integration of several types of process control instrumentation equipment such as transmitters, controllers, integrators, recorders, process and analytical machinery. Perform with tools of the trade. Knowledge and use of electrical/Instrument tools, fluke meter etc., Make repairs to electrical power, motor and motor control circuits. Must be able to effectively communicate and speak English. ORGANIZATIONAL RELATIONSHIPS 1. Reports to: Site Management 2. Directs: This is a non-supervisory position 3. Other: Works integrally with coworkers, customers and contractors. EXAMPLES OF WORK Routine maintenance which includes but is not limited to the following: * field fault analysis -- determines if instrument has failed or if it is a process problem; * Field calibration of instrumentation utilizing proper test equipment; * Complete overhaul in shop environment to include component replacements, alignments and calibration to specifications of record; * Repair of signal transmission facility such as tubing, wiring, etc.; * Instrumentation to include pneumatic, electronic and digital equipment; * fault analysis of hardwire relay logic, motor control circuits, motor power circuits (120V to 480V 3phase) and common utility / lighting circuits; * installation of new control circuits, modification of existing instrument/electrical systems as requested, to include design, load and Implementation of new control logic; * Fault analysis of PLC based systems with control logic modification if required. * Develops, prepares and presents recommendations and reports as requested. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES Must be a High School graduate or GED equivalent, demonstrate proficiency in both oral and written communication. Must have the ability to interpret schematic drawings (to component level) of pneumatic loops, hardware relay logic diagrams, PLC control programs, motor control circuit diagrams, etc. Must associate circuit symbols with actual components to include solid state electronics (transistors, integrated chips, resistors, capacitors, etc.) and common industrial electrical hardware (relays, contactors, starters, etc.). Must have good mathematical skills to include basic algebra for calculation of electrical/electronic equations. Must be able to install and bend electrical conduit of the various trade, size (pvc, emt, rigid) and install instrumentation tubing. The ability to analyze problems, identify solutions, project consequences of proposed actions and implement recommendations in support of goals. Must be able to lift and maneuver 50 pounds. BENEFITS Brown and Root offers a selection of competitive lifestyle benefits which could include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or belis, or any other characteristics protected by federal, state, or local law. Full-Time/Part Time Regular Full-Time Requirements Job Description: Instrumentation/Electrical Technician SUMMRY OF POSITION Performs routine maintenance, installation and integration of several types of process control instrumentation equipment such as transmitters, controllers, integrators, recorders, process and analytical machinery. Perform with tools of the trade. Knowledge and use of electrical/Instrument tools, fluke meter etc., Make repairs to electrical power, motor and motor control circuits. Must be able to effectively communicate and speak English. ORGANIZATIONAL RELATIONSHIPS 1. Reports to: Site Management 2. Directs: This is a non-supervisory position 3. Other: Works integrally with coworkers, customers and contractors. EXAMPLES OF WORK Routine maintenance which includes but is not limited to the following: * field fault analysis -- determines if instrument has failed or if it is a process problem; * Field calibration of instrumentation utilizing proper test equipment; * Complete overhaul in shop environment to include component replacements, alignments and calibration to specifications of record; * Repair of signal transmission facility such as tubing, wiring, etc.; * Instrumentation to include pneumatic, electronic and digital equipment; * fault analysis of hardwire relay logic, motor control circuits, motor power circuits (120V to 480V 3phase) and common utility / lighting circuits; * installation of new control circuits, modification of existing instrument/electrical systems as requested, to include design, load and Implementation of new control logic; * Fault analysis of PLC based systems with control logic modification if required. * Develops, prepares and presents recommendations and reports as requested. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES Must be a High School graduate or GED equivalent, demonstrate proficiency in both oral and written communication. Must have the ability to interpret schematic drawings (to component level) of pneumatic loops, hardware relay logic diagrams, PLC control programs, motor control circuit diagrams, etc. Must associate circuit symbols with actual components to include solid state electronics (transistors, integrated chips, resistors, capacitors, etc.) and common industrial electrical hardware (relays, contactors, starters, etc.). Must have good mathematical skills to include basic algebra for calculation of electrical/electronic equations. Must be able to install and bend electrical conduit of the various trade, size (pvc, emt, rigid) and install instrumentation tubing. The ability to analyze problems, identify solutions, project consequences of proposed actions and implement recommendations in support of goals. Must be able to lift and maneuver 50 pounds. BENEFITS Brown and Root offers a selection of competitive lifestyle benefits which could include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or belis, or any other characteristics protected by federal, state, or local law.

Job Description: Instrumentation/Electrical Technician

SUMMRY OF POSITION

Performs routine maintenance, installation and integration of several types of process control instrumentation equipment such as transmitters, controllers, integrators, recorders, process and analytical machinery. Perform with tools of the trade. Knowledge and use of electrical/Instrument tools, fluke meter etc., Make repairs to electrical power, motor and motor control circuits. Must be able to effectively communicate and speak English.

ORGANIZATIONAL RELATIONSHIPS

1. Reports to: Site Management
2. Directs: This is a non-supervisory position
3. Other: Works integrally with coworkers, customers and contractors.

EXAMPLES OF WORK

Routine maintenance which includes but is not limited to the following:

* field fault analysis -- determines if instrument has failed or if it is a process problem;

* Field calibration of instrumentation utilizing proper test equipment;

* Complete overhaul in shop environment to include component replacements, alignments and calibration to specifications of record;

* Repair of signal transmission facility such as tubing, wiring, etc.;

* Instrumentation to include pneumatic, electronic and digital equipment;

* fault analysis of hardwire relay logic, motor control circuits, motor power circuits (120V to 480V 3phase) and common utility / lighting circuits;

* installation of new control circuits, modification of existing instrument/electrical systems as requested, to include design, load and Implementation of new control logic;

* Fault analysis of PLC based systems with control logic modification if required.

* Develops, prepares and presents recommendations and reports as requested.

REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES

Must be a High School graduate or GED equivalent, demonstrate proficiency in both oral and written communication. Must have the ability to interpret schematic drawings (to component level) of pneumatic loops, hardware relay logic diagrams, PLC control programs, motor control circuit diagrams, etc. Must associate circuit symbols with actual components to include solid state electronics (transistors, integrated chips, resistors, capacitors, etc.) and common industrial electrical hardware (relays, contactors, starters, etc.). Must have good mathematical skills to include basic algebra for calculation of electrical/electronic equations. Must be able to install and bend electrical conduit of the various trade, size (pvc, emt, rigid) and install instrumentation tubing. The ability to analyze problems, identify solutions, project consequences of proposed actions and implement recommendations in support of goals. Must be able to lift and maneuver 50 pounds.

BENEFITS Brown and Root offers a selection of competitive lifestyle benefits which could include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or belis, or any other characteristics protected by federal, state, or local law.

E&I Tech Journeyman APPLY Maysville KY FUNCTIONAL GROUP Electrical Zip Code 41056 Job Description Job Description: Instrumentation/Electrical Technician SUMMRY OF POSITION Performs routine maintenance, installation and integration of several types of process control instrumentation equipment such as transmitters, controllers, integrators, recorders, process and analytical machinery. Perform with tools of the trade. Knowledge and use of electrical/Instrument tools, fluke meter etc., Make repairs to electrical power, motor and motor control circuits. Must be able to effectively communicate and speak English. ORGANIZATIONAL RELATIONSHIPS 1. Reports to: Site Management 2. Directs: This is a non-supervisory position 3. Other: Works integrally with coworkers, customers and contractors. EXAMPLES OF WORK Routine maintenance which includes but is not limited to the following: * field fault analysis -- determines if instrument has failed or if it is a process problem; * Field calibration of instrumentation utilizing proper test equipment; * Complete overhaul in shop environment to include component replacements, alignments and calibration to specifications of record; * Repair of signal transmission facility such as tubing, wiring, etc.; * Instrumentation to include pneumatic, electronic and digital equipment; * fault analysis of hardwire relay logic, motor control circuits, motor power circuits (120V to 480V 3phase) and common utility / lighting circuits; * installation of new control circuits, modification of existing instrument/electrical systems as requested, to include design, load and Implementation of new control logic; * Fault analysis of PLC based systems with control logic modification if required. * Develops, prepares and presents recommendations and reports as requested. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES Must be a High School graduate or GED equivalent, demonstrate proficiency in both oral and written communication. Must have the ability to interpret schematic drawings (to component level) of pneumatic loops, hardware relay logic diagrams, PLC control programs, motor control circuit diagrams, etc. Must associate circuit symbols with actual components to include solid state electronics (transistors, integrated chips, resistors, capacitors, etc.) and common industrial electrical hardware (relays, contactors, starters, etc.). Must have good mathematical skills to include basic algebra for calculation of electrical/electronic equations. Must be able to install and bend electrical conduit of the various trade, size (pvc, emt, rigid) and install instrumentation tubing. The ability to analyze problems, identify solutions, project consequences of proposed actions and implement recommendations in support of goals. Must be able to lift and maneuver 50 pounds. BENEFITS Brown and Root offers a selection of competitive lifestyle benefits which could include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or belis, or any other characteristics protected by federal, state, or local law. Full-Time/Part Time Regular Full-Time Requirements Job Description: Instrumentation/Electrical Technician SUMMRY OF POSITION Performs routine maintenance, installation and integration of several types of process control instrumentation equipment such as transmitters, controllers, integrators, recorders, process and analytical machinery. Perform with tools of the trade. Knowledge and use of electrical/Instrument tools, fluke meter etc., Make repairs to electrical power, motor and motor control circuits. Must be able to effectively communicate and speak English. ORGANIZATIONAL RELATIONSHIPS 1. Reports to: Site Management 2. Directs: This is a non-supervisory position 3. Other: Works integrally with coworkers, customers and contractors. EXAMPLES OF WORK Routine maintenance which includes but is not limited to the following: * field fault analysis -- determines if instrument has failed or if it is a process problem; * Field calibration of instrumentation utilizing proper test equipment; * Complete overhaul in shop environment to include component replacements, alignments and calibration to specifications of record; * Repair of signal transmission facility such as tubing, wiring, etc.; * Instrumentation to include pneumatic, electronic and digital equipment; * fault analysis of hardwire relay logic, motor control circuits, motor power circuits (120V to 480V 3phase) and common utility / lighting circuits; * installation of new control circuits, modification of existing instrument/electrical systems as requested, to include design, load and Implementation of new control logic; * Fault analysis of PLC based systems with control logic modification if required. * Develops, prepares and presents recommendations and reports as requested. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES Must be a High School graduate or GED equivalent, demonstrate proficiency in both oral and written communication. Must have the ability to interpret schematic drawings (to component level) of pneumatic loops, hardware relay logic diagrams, PLC control programs, motor control circuit diagrams, etc. Must associate circuit symbols with actual components to include solid state electronics (transistors, integrated chips, resistors, capacitors, etc.) and common industrial electrical hardware (relays, contactors, starters, etc.). Must have good mathematical skills to include basic algebra for calculation of electrical/electronic equations. Must be able to install and bend electrical conduit of the various trade, size (pvc, emt, rigid) and install instrumentation tubing. The ability to analyze problems, identify solutions, project consequences of proposed actions and implement recommendations in support of goals. Must be able to lift and maneuver 50 pounds. BENEFITS Brown and Root offers a selection of competitive lifestyle benefits which could include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or belis, or any other characteristics protected by federal, state, or local law.