HVAC Helper I

United StatesNormalmid

OtherHvac

0 views0 saves0 applied

Apply Now

Quick Summary

Key Responsibilities

Air conditioning systems Heating systems Air handlers Chillers Cooling towers Compressors Pumps Exhaust and ventilation systems Ductwork Filters and belts Assist with refrigerant recovery, evacuation,

Technical Tools

OtherHvac

The HVAC Helper/Apprentice assists HVAC technicians with the installation, maintenance, troubleshooting, and repair of industrial heating, ventilation, and air-conditioning systems. This position is intended for an individual who has an HVAC Apprentice License and is developing the skills necessary to become a qualified HVAC technician while working under the direction of experienced HVAC personnel.

The position supports HVAC systems throughout industrial facilities, including compressors, air handlers, chillers, cooling systems, ventilation equipment, pumps, ductwork, and associated controls.

Responsibilities

~4 min read

→Assist journeyman HVAC technicians with installation, maintenance, troubleshooting, and repair of HVAC systems.
→Perform routine preventive maintenance on HVAC equipment.
→Assist with servicing and maintaining:
- →Air conditioning systems
- →Heating systems
- →Air handlers
- →Chillers
- →Cooling towers
- →Compressors
- →Pumps
- →Exhaust and ventilation systems
- →Ductwork
- →Filters and belts
→Assist with refrigerant recovery, evacuation, charging, and leak detection under appropriate supervision and authorization.
→Assist with electrical troubleshooting of HVAC equipment, including motors, contactors, relays, thermostats, and controls.
→Use hand tools, power tools, meters, gauges, and other HVAC equipment safely.
→Assist with installation and replacement of piping, tubing, ductwork, insulation, valves, and HVAC components.
→Take temperature, pressure, and other equipment readings and report abnormal conditions.
→Assist with diagnosing equipment problems and identifying potential causes of failure.
→Perform equipment cleaning and general housekeeping around HVAC systems.
→Maintain tools, equipment, and work areas in a clean and safe condition.
→Read and interpret basic drawings, equipment manuals, schematics, and work orders.
→Maintain accurate documentation of maintenance activities and equipment conditions.
→Work with journeyman technicians to develop HVAC troubleshooting and repair skills.

→Follow all company, client, OSHA, and site-specific safety requirements.
→Participate in daily toolbox talks, pre-job meetings, and Job Safety Analysis (JSA) activities.
→Follow Lockout/Tagout (LOTO) procedures before working on energized equipment.
→Properly use required PPE.
→Follow electrical safety, fall protection, confined-space, and hot-work requirements as applicable.
→Handle refrigerants and chemicals in accordance with applicable regulations and company procedures.
→Report unsafe conditions, equipment defects, incidents, and near misses immediately.
→Maintain good housekeeping and keep work areas free of hazards.

→Maintain a valid HVAC Apprentice License as required by the applicable state or jurisdiction.
→Perform work within the scope permitted by the apprentice license and applicable regulations.
→Work under the required supervision of a qualified HVAC journeyman or licensed technician.
→Participate in on-the-job training and technical development.
→Maintain required apprenticeship training records and documentation.
→Progress toward additional HVAC certifications and licensing requirements.

→Assist journeyman HVAC technicians with installation, maintenance, troubleshooting, and repair of HVAC systems.
→Perform routine preventive maintenance on HVAC equipment.
→Assist with servicing and maintaining:
- →Air conditioning systems
- →Heating systems
- →Air handlers
- →Chillers
- →Cooling towers
- →Compressors
- →Pumps
- →Exhaust and ventilation systems
- →Ductwork
- →Filters and belts
→Assist with refrigerant recovery, evacuation, charging, and leak detection under appropriate supervision and authorization.
→Assist with electrical troubleshooting of HVAC equipment, including motors, contactors, relays, thermostats, and controls.
→Use hand tools, power tools, meters, gauges, and other HVAC equipment safely.
→Assist with installation and replacement of piping, tubing, ductwork, insulation, valves, and HVAC components.
→Take temperature, pressure, and other equipment readings and report abnormal conditions.
→Assist with diagnosing equipment problems and identifying potential causes of failure.
→Perform equipment cleaning and general housekeeping around HVAC systems.
→Maintain tools, equipment, and work areas in a clean and safe condition.
→Read and interpret basic drawings, equipment manuals, schematics, and work orders.
→Maintain accurate documentation of maintenance activities and equipment conditions.
→Work with journeyman technicians to develop HVAC troubleshooting and repair skills.

→Follow all company, client, OSHA, and site-specific safety requirements.
→Participate in daily toolbox talks, pre-job meetings, and Job Safety Analysis (JSA) activities.
→Follow Lockout/Tagout (LOTO) procedures before working on energized equipment.
→Properly use required PPE.
→Follow electrical safety, fall protection, confined-space, and hot-work requirements as applicable.
→Handle refrigerants and chemicals in accordance with applicable regulations and company procedures.
→Report unsafe conditions, equipment defects, incidents, and near misses immediately.
→Maintain good housekeeping and keep work areas free of hazards.

→Maintain a valid HVAC Apprentice License as required by the applicable state or jurisdiction.
→Perform work within the scope permitted by the apprentice license and applicable regulations.
→Work under the required supervision of a qualified HVAC journeyman or licensed technician.
→Participate in on-the-job training and technical development.
→Maintain required apprenticeship training records and documentation.
→Progress toward additional HVAC certifications and licensing requirements.

The HVAC Helper/Apprentice may assist with equipment and systems such as:

Industrial air-conditioning systems
Package units
Split systems
Chillers
Cooling towers
Air compressors and dryers
Air handlers
Heating systems
Ventilation and exhaust systems
Building automation and HVAC controls
Pumps and circulating systems
Process cooling systems

The HVAC Helper/Apprentice may assist with equipment and systems such as:

Industrial air-conditioning systems
Package units
Split systems
Chillers
Cooling towers
Air compressors and dryers
Air handlers
Heating systems
Ventilation and exhaust systems
Building automation and HVAC controls
Pumps and circulating systems
Process cooling systems

Requirements

~3 min read

High School Diploma or GED preferred.
Valid HVAC Apprentice License required.
1–3 years of HVAC experience preferred; industrial experience is a plus.
HVAC technical school or apprenticeship program preferred.
Basic understanding of mechanical, electrical, and refrigeration systems.
Industrial, commercial, manufacturing, chemical, petrochemical, or power-generation experience preferred.

Ability to stand, walk, bend, kneel, climb, and work overhead for extended periods.
Ability to climb ladders and access elevated equipment.
Ability to lift and carry up to 50 pounds.
Ability to work in confined spaces when required.
Ability to work indoors and outdoors in varying weather conditions.
Ability to wear required PPE, including hard hat, safety glasses, gloves, hearing protection, steel-toe boots, and FR clothing when required.

Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

The position supports HVAC systems throughout industrial facilities, including compressors, air handlers, chillers, cooling systems, ventilation equipment, pumps, ductwork, and associated controls.

High School Diploma or GED preferred.
Valid HVAC Apprentice License required.
1–3 years of HVAC experience preferred; industrial experience is a plus.
HVAC technical school or apprenticeship program preferred.
Basic understanding of mechanical, electrical, and refrigeration systems.
Industrial, commercial, manufacturing, chemical, petrochemical, or power-generation experience preferred.

Ability to stand, walk, bend, kneel, climb, and work overhead for extended periods.
Ability to climb ladders and access elevated equipment.
Ability to lift and carry up to 50 pounds.
Ability to work in confined spaces when required.
Ability to work indoors and outdoors in varying weather conditions.
Ability to wear required PPE, including hard hat, safety glasses, gloves, hearing protection, steel-toe boots, and FR clothing when required.