~4mo ago

Crewperson 6A-C, P.M. Mechanical VFD Technician

United StatesUnited States·Sumtermid
OtherTechnician
1 views0 saves0 applied

Quick Summary

Key Responsibilities

Troubleshooting and Diagnostics Diagnose and troubleshoot Variable Frequency Drives (VFDs), HVAC controls, motors, pumps, and associated electrical systems. Analyze system alarms, fault codes,

Requirements Summary

High School Diploma or GED preferred. Technical or vocational training in electrical systems, HVAC controls, industrial maintenance, or related field preferred.

Technical Tools
OtherTechnician

Responsibilities

~2 min read

Troubleshooting and Diagnostics

  • →Diagnose and troubleshoot Variable Frequency Drives (VFDs), HVAC controls, motors, pumps, and associated electrical systems.
  • →Analyze system alarms, fault codes, communication issues, and operating conditions to determine the root cause of equipment failures.
  • →Use diagnostic and testing equipment to evaluate system performance and identify deficiencies.
  • →Respond to service requests and emergency repair calls in a timely and professional manner.
  • →Make recommendations to the Supervisor regarding repairs, upgrades, and system improvements.

Preventative Maintenance

  • →Perform scheduled preventative maintenance on VFDs, motors, HVAC equipment, control panels, and related electrical systems.
  • →Inspect electrical connections, wiring, cooling fans, filters, and components for wear or failure.
  • →Maintain records and documentation necessary for efficient unit operation.
  • →Assist in maintaining energy-efficient operation of district mechanical systems.

Repair and Service

  • →Repair or replace defective VFD components, wiring, control devices, and related equipment.
  • →Test repaired systems to verify safe and proper operation.
  • →Coordinate repairs with district maintenance personnel, contractors, and vendors as needed.
  • →Maintain tools, equipment, and assigned vehicles in a clean and safe operating condition.
  • →Accept responsibility for all tools, supplies, materials, and district equipment assigned.

Installation and Commissioning

  • →Install VFDs, electrical controls, conduit, wiring, and associated equipment for district facilities.
  • →Configure and program VFD parameters for HVAC systems, pumps, and motors.
  • →Assist with startup, testing, and commissioning of new or upgraded equipment.
  • →Read and interpret electrical schematics, blueprints, diagrams, and technical manuals.

General Duties

  • →Perform work in a safe manner and report hazardous conditions immediately.
  • →Follow all district and OSHA safety procedures, including proper Lockout/Tagout (LOTO) procedures when servicing or working on electrical and mechanical equipment.
  • →Work cooperatively with other district employees, departments, and outside vendors.
  • →Maintain positive public relations while representing Wichita Public Schools and the Facilities Division.
  • →Attend required meetings, in-services, and training opportunities.
  • →Demonstrate willingness to learn new methods, procedures, and technologies related to the position.
  • →Support the organizational goals, mission, and operational objectives of Wichita Public Schools.
  • →Perform additional duties as assigned by the Supervisor.

The employee must demonstrate the ability to safely operate and maintain equipment associated with the position. This position may require the use of iPads, computers, copiers, scanners, and related office equipment.

The employee must comply with all district guidelines regarding equipment use and safety procedures.

Tools and equipment may include, but are not limited to:

  • Electrical hand tools and power tools
  • Digital multimeters and electrical testing equipment
  • VFD diagnostic and programming tools
  • Laptops or tablets used for drive configuration and monitoring
  • Electrical meters and troubleshooting instruments
  • Conduit and wiring installation tools
  • Ladders and personnel lifts
  • District vehicles and vans
  • Ability to perform all assigned tasks and work required hours.
  • Ability to work indoors and outdoors in varying weather conditions including heat, cold, rain, and snow.
  • Ability to wear required safety equipment.
  • Ability to work overtime on short notice when necessary.
  • Ability to work in confined spaces, mechanical rooms, rooftops, and elevated areas.
  • Ability to perform strenuous physical work including standing, walking, climbing, bending, kneeling, lifting, and carrying equipment and materials.
  • Ability to lift and carry equipment and materials up to 50 pounds.
  • Ability to work productively in stressful situations and adapt to changing schedules.
  • Daily schedules may fluctuate to accommodate operational needs and emergency responses.

Exposure to dust, fumes, chemicals, refrigerants, oils, cleaning agents, compressed gases, and related maintenance materials may occur while performing job duties.

  • Strong troubleshooting and problem-solving skills.
  • Knowledge of Variable Frequency Drives (VFDs), HVAC systems, motor controls, electrical systems, and Direct Digital Control (DDC) systems.
  • Knowledge of electrical theory, control circuits, building automation systems, and DDC controls used in commercial and educational facilities.
  • Ability to read and interpret electrical schematics, blueprints, and technical documentation.
  • Ability to safely operate hand tools, power tools, and testing equipment.
  • Ability to communicate effectively both verbally and in writing.
  • Ability to plan, organize, prioritize, and complete work assignments efficiently.
  • Ability to work independently and as part of a team.
  • Ability to maintain professionalism, confidentiality, and positive working relationships.
  • Basic computer proficiency including Microsoft Word and Outlook.
  • Ability to learn new technologies, methods, and procedures.
  • Strong customer service skills and the ability to work effectively with staff, students, vendors, and the public.
  • High mechanical aptitude and working knowledge of HVAC systems.

 

 

  • Frequent contact with district personnel, contractors, vendors, and service providers.
  • Works under the direct supervision of the department Supervisor.
  • Interacts with a diverse population requiring tact, diplomacy, professionalism, and effective communication.
  • Expected to provide responsive customer service and maintain positive working relationships with all stakeholders.

Requirements

~1 min read
  • High School Diploma or GED preferred.
  • Technical or vocational training in electrical systems, HVAC controls, industrial maintenance, or related field preferred.
  • Experience with Variable Frequency Drives (VFDs), HVAC systems, motor controls, and electrical troubleshooting preferred.
  • Maintain a valid Kansas driver’s license throughout employment.
  • Mechanical or Electrical Journeyman license required.

FLSA Status: Non-Exempt

Location & Eligibility

Where is the job
Sumter, United States
On-site at the office
Who can apply
US

About this job

Who can apply
United States
Posted
138 days ago
Employer
has 49 open jobs on Jobera.

Listing Details

First seen
July 3, 2026
Last seen
November 18, 2026

Posting Health

Days active
137
Repost count
0
Trust Level
19%
Scored at
November 18, 2026

Signal breakdown

freshnesssource trustcontent trustemployer trust
Newsletter

Stay ahead of the market

Get the latest job openings, salary trends, and hiring insights delivered to your inbox every week.

A
B
C
D
Join 12,000+ marketers

No spam. Unsubscribe at any time.

Crewperson 6A-C, P.M. Mechanical VFD Technician