Assembler I - 1st Shift - El Paso TX
Manufacturing & ProductionProduction Associate
1 views0 saves0 applied
Quick Summary
Key Responsibilities
Required:• High School Diploma or equivalent from an accredited institution. • No relocation benefit is offered for this position.
Requirements Summary
5:00am - 3:45pm, Monday-Thursday.Please note the salary information shown above is
Technical Tools
Manufacturing & ProductionProduction Associate
ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers. If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post.
Eaton’s ES AMER PCS division is currently seeking a Assembler I - 1st Shift to join the El Paso, TX team!
The hourly rate for this position is $16.76 per hour. This position is also eligible for a variable incentive plan.
Shift: 5:00am - 3:45pm, Monday-Thursday.
Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.
Why work at Eaton?
We provide competitive benefits that focus on employee well-being that start on day one! Listed below are programs that are offered by our manufacturing site. Visit Eaton.com for more information.
• Health, Dental, Vision Insurance
• Competitive compensation packages
• Paid parental leave, holidays, and vacation!
• Healthcare/retirement savings programs with company match, Education/Tuition Assistance Program, Annual Wellness Reimbursement, and more!
Position Overview:
Subassemblies, components, and standard fixed assemblies in electrical control equipment. Perform assembly or wiring required for test preparation and final inspection. Use established power-checking procedures and equipment to verify the electrical/mechanical integrity of units assembled. Perform all assignments within the acceptable quantity and quality requirements.
In this function you will:
• Perform the assigned function from oral and/or written instructions, drawings, or other manufacturing information.
• Handle materials following established procedures.
• Perform routine maintenance on all plant equipment in the area of assignment as required.
• Maintain quality standards by inspecting and testing finished products to ensure conformance with specifications and codes.
• Maintain expected progress of jobs in the area of assignment and communicate problem areas or parts shortages.
• Handle all finished products for shipment; call carriers and load materials into carrier's vehicles.
• Observe good housekeeping and safety procedures and keep equipment, tools, and work area clean and orderly by performing 5-S duties and continued dedication to raising the bar.
Eaton’s ES AMER PCS division is currently seeking a Assembler I - 1st Shift to join the El Paso, TX team!
The hourly rate for this position is $16.76 per hour. This position is also eligible for a variable incentive plan.
Shift: 5:00am - 3:45pm, Monday-Thursday.
Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations.
Why work at Eaton?
We provide competitive benefits that focus on employee well-being that start on day one! Listed below are programs that are offered by our manufacturing site. Visit Eaton.com for more information.
• Health, Dental, Vision Insurance
• Competitive compensation packages
• Paid parental leave, holidays, and vacation!
• Healthcare/retirement savings programs with company match, Education/Tuition Assistance Program, Annual Wellness Reimbursement, and more!
Position Overview:
Subassemblies, components, and standard fixed assemblies in electrical control equipment. Perform assembly or wiring required for test preparation and final inspection. Use established power-checking procedures and equipment to verify the electrical/mechanical integrity of units assembled. Perform all assignments within the acceptable quantity and quality requirements.
In this function you will:
• Perform the assigned function from oral and/or written instructions, drawings, or other manufacturing information.
• Handle materials following established procedures.
• Perform routine maintenance on all plant equipment in the area of assignment as required.
• Maintain quality standards by inspecting and testing finished products to ensure conformance with specifications and codes.
• Maintain expected progress of jobs in the area of assignment and communicate problem areas or parts shortages.
• Handle all finished products for shipment; call carriers and load materials into carrier's vehicles.
• Observe good housekeeping and safety procedures and keep equipment, tools, and work area clean and orderly by performing 5-S duties and continued dedication to raising the bar.
Responsibilities
~1 min readQualifications:
Required:
• High School Diploma or equivalent from an accredited institution.
• No relocation benefit is offered for this position. Only candidates residing within the immediate area of the Eaton El Paso, TX facility (50-mile radius) will be considered for this position. Active Duty Military Service member candidates are exempt from the geographical area limitation
• Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
Preferred Qualifications:
• 1 or more years of manufacturing, production, construction, industrial, or military experience OR a degree in a technical discipline
• Forklift driver certification
• 1 or more years of experience with supply chain systems (AS400, MAPICS)
• 1 or more years of experience in electrical equipment manufacturing and assembly (panelboards/switchboards preferred)
• 1 or more years of experience in electrical equipment maintenance/installation
Position Criteria:
Experience using various tools, including Manual/electric/pneumatic tools, drill press, press brake, fork truck, jib crane, template/fixtures, hand carts, measuring and testing equipment, storage/packaging materials, and prescribed safety equipment.
Must be able to interact and contribute in a team environment.
Required:
• High School Diploma or equivalent from an accredited institution.
• No relocation benefit is offered for this position. Only candidates residing within the immediate area of the Eaton El Paso, TX facility (50-mile radius) will be considered for this position. Active Duty Military Service member candidates are exempt from the geographical area limitation
• Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.
Preferred Qualifications:
• 1 or more years of manufacturing, production, construction, industrial, or military experience OR a degree in a technical discipline
• Forklift driver certification
• 1 or more years of experience with supply chain systems (AS400, MAPICS)
• 1 or more years of experience in electrical equipment manufacturing and assembly (panelboards/switchboards preferred)
• 1 or more years of experience in electrical equipment maintenance/installation
Position Criteria:
Experience using various tools, including Manual/electric/pneumatic tools, drill press, press brake, fork truck, jib crane, template/fixtures, hand carts, measuring and testing equipment, storage/packaging materials, and prescribed safety equipment.
Must be able to interact and contribute in a team environment.
Location & Eligibility
Where is the job
El Paso, United States
On-site at the office
Who can apply
US
About this job
- Pay per year
- ≈ $34,861 a year
- 26% below the $47,362 median for Production Associate jobs on Jobera (1,032 salaries).
- Who can apply
- United States
- Posted
- 6 days ago
Listing Details
- Posted
- November 10, 2026
- First seen
- November 10, 2026
- Last seen
- November 15, 2026
Posting Health
- Days active
- 4
- Repost count
- 0
- Trust Level
- 45%
- Scored at
- November 15, 2026
Signal breakdown
freshnesssource trustcontent trustemployer trust
Browse Similar Jobs
Manufacturing Engineer2.2kProduction Technician2.1kMachine Operator2.1kQuality Manager1.7kQuality Technician1.4kProduction Supervisor1.4kMachinist1.1kProduction Operator658Industrial Engineer548Production Manager543Process Technician336Production Engineer286Plant Manager285Assembly Technician271Press Operator263Manufacturing Supervisor202Industrial Maintenance Technician181Maintenance Planner157Cnc Operator143Cnc Programmer138
Newsletter
Stay ahead of the market
Get the latest job openings, salary trends, and hiring insights delivered to your inbox every week.
A
B
C
D
No spam. Unsubscribe at any time.