Flexible FCO Operator

• →Setup, operate, maintain, and assist in troubleshooting problems with FCO equipment (for example tube straightener, heat treat, polisher, and cut-to-length machines).
• →Operate computer-based automatic inspection systems (for example, ‘Multi-Inspection and Data Accumulation System’ (MIDAS) for fuel tubing). Operation entails performing calibration checks of eddy current, ultrasonic, and other dimensional measurement systems, verifying proper operation of laser barcode marking systems and defect marking systems, and loading/unloading product from the systems.
• →Analyze and interpret UT and EC charts for flaw characterization and process control.
• →Visually characterize OD flaws using 10X magnification or heat treat samples for release using 16X magnification as needed.
• →Train other operators in this job code.
• →Deburr and rework product end conditions using hand tools as needed.
• →Operate overhead cranes and other material handling equipment to move material into place.
• →Oversee operation of more than one machine at a time.
• →Become certified by passing both written and practical tests administered by the QC Level A3 for product inspection.
• →Maintain material traceability at each work station.
• →Maintain work station cleanliness and housekeeping, and perform all work to established safety practices.
• →Segregate and transfer rejected material to the quarantine area.
• →Become proficient with the operation of the following gages: laser micrometer, profilometer, ultrasonic dimensional inspection machine, and dial indicator.

• Occasional intense visual examination using 10X magnifiers is required.
• Lifting and moving up to 10-30 pounds of tubes many times during an 8-hour shift is typical.
• Good physical dexterity is required for equipment setup and adjustment.
• Must maintain mental awareness to discover quality problems even after observing attributes in a repetitive manner.
• Must be able to locate tube ends into holes in a support plate located 13 feet above the floor.
• Overtime scheduling and unusual hours including short notice/split shifts are occasionally required to meet business needs.
• Correctable vision is required.
• Will be periodically tested for proficiency during customer audits and certification activities.

• Work position is generally standing with moderate walking.
• Job functions are performed indoors in a factory environment.
• Can be exposed to hand and bodily injury from moving belts, gears, or equipment while performing setups and machine adjustments.
• Can work with chemicals such as nitric and HF acid
• Coveralls are needed during weekly preventative maintenance as coolant and Zircaloy slurry is cleaned out of filter media and machine parts.

• High school diploma or equivalent is required.
• Must be able to read and write clearly, to add and subtract whole numbers, and to perform percentage calculations.
• Experience in setting up mechanical equipment is required.
• Must have at least one of the following: prior experience in the operation of ultrasonic test (UT) equipment including UT chart review, orsuccessful completion of a course on the fundamentals of ultrasonic testing, orprior experience with operation and setup of automated welding equipment, orCNC machine operation experience.
• Must be able to pass QC vision test and must be able to pass a written test for ANSI N-45.2.6 Level A1 certification.
• Prior experience in using dial indicators or micrometers and preparing accurate production/quality records both manually and through the use of computer terminals. May be required to demonstrate computer skills.
• Ability to become crane certified within a reasobable amount of time.
• Prior experience setting up and operating equipment controlled by a computer interface and/or programmable logic controller.
• Must be able to frequently lift and move up to 10-30 pounds as well as locate tube ends into holes in a support plate located 13 feet above the floor.

Pay Transparency: For candidates applying to a U.S. based position, the base pay for this position is $32.31/hr progressing to $35.30 hour after 6 months of satisfactory performance plus $1.00/hr shift differential. The position will remain open until a candidate is identified for offer.

This posting is expected to close when a suitable candidate has been identified.

This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. ​