Electronics Technician
US·Fort BraggmidProduction TechnicianManufacturing & Production
0 views0 saves0 applied
Quick Summary
Requirements Summary
Sustain an uncompromising equipment Operational Readiness (OR) rate to ensure continuous candidate throughput across the Spec
Technical Tools
Production TechnicianManufacturing & Production
Responsibilities
~2 min read- →Sustain an uncompromising equipment Operational Readiness (OR) rate to ensure continuous candidate throughput across the Special Forces Qualification Course (SFQC) and associated high-risk tactical training blocks.
- →Operate as hands-on bench peers under the general supervision of the shop supervisor.
- →Inspect, test, align, troubleshoot, and repair modern tactical communications and Type-1 cryptographic encryption systems.
- →Utilize advanced test sets, oscilloscopes, and spectrum analyzers to isolate and correct faults within tactical HF, VHF, and UHF multiband transceivers, specifically including the AN/PRC-117G, AN/PRC-152A, AN/PRC-163, and AN/PRC-148 systems.
- →Perform software updates, cryptographic key-loading procedures, module replacements, and technical diagnostics on secure fill devices (e.g., KGV-72, AN/PYQ-10 SKL, TKLs) in strict accordance with National Security Agency (NSA) physical and electronic security guidelines, ensuring the complete preservation of Controlled Cryptographic Items (CCI) and COMSEC data integrity.
- →Diagnose, calibrate, repair, and maintain military dismounted navigation systems, surveillance arrays, and tactical electronic detection devices.
- →Technical tasks include performing circuit level diagnostics, component replacement, and system functional testing on Defense Advanced GPS Receivers (DAGR) and Dismounted Assured Positioning Systems (DAPS).
- →Ensure the operational readiness of tactical radio frequency (RF) repeaters, counter-UAS sensors, and specialized directional-finding surveillance platforms utilized by training committees, resolving hardware and firmware faults to prevent communication and telemetry dropouts during remote field exercises.
- →Execute advanced intermediate-level maintenance, alignment, and purging cycles for standard and high-performance electro-optical, night vision, and thermal weapon systems.
- →Perform technical services on standard Night Optical Devices (AN/PVS-14, AN/PVS31A, AN/AVS-9), high-performance White Phosphor Night Optical Devices (AN/PSQ-36 FGE, PVS31C), and clip-on thermal devices (AN/PAS-13 series, COTI/ECOTI).
- →Technical operations shall encompass nitrogen leak testing, vacuum purging, tube gain calibration, reticle alignment, optical axis collimation, infinity focus adjustments, and high-precision resolution testing utilizing TS-4348/UV or ANV-126 test sets within specialized, dust-free darkroom environments.
- →Document all technical diagnostics, parts consumption, preventive maintenance actions, and completed work orders within standard Army automated logistics database systems.
- →Maintain meticulous maintenance records, track equipment repair turnaround times (TAT), manage shop parts inventories (Class IX), and initiate replenishment requisitions.
- →Execute final quality assurance inspections on all serviced communications, COMSEC, and electro-optical platforms prior to inventory turn-back, verifying that repaired equipment conforms strictly to Department of the Army technical manuals, quality control standards, and manufacturer specifications.
Requirements
~2 min read- US Citizen
- Valid U.S. driver’s license
- Must hold an active Secret Security Clearance
- Must possess and maintain an active Department of Defense Secret security clearance, undergo a favorable Tier 1 (T1) background investigation, and complete annual Cyber Awareness, Information Assurance, and PII protection training prior to receiving access to Government-furnished computer terminals or secure COMSEC storage facilities
- Minimum of three (3) years of verifiable bench-level experience in tactical communications repair, COMSEC diagnostics, and electro-optics purging/collimation
- Minimum three years’ experience and honorably served as an Army MOS 94E (Radio/COMSEC Repairer), 94F (Computer/Detection Repairer), or 91F (Small Arms/Artillery Repairer) with electro-optics ASI, or have equivalent experience from another military branch or hold equivalent certified civilian technical credentials
- Must have experience providing intermediate-level diagnostic troubleshooting, preventive and corrective maintenance, and component-level repair of mission-critical tactical communications, communications security (COMSEC), and advanced night optical devices (NODs)
- Must be proficient in installing, operating, maintaining, repairing, calibrating, tuning, and adjusting electronic equipment used for communications, navigation, detection, identification, cryptography, and surveillance
- Must have experience managing command and control systems, communications equipment, encryption equipment, and tactical electronic detection systems
- Must be proficient in installing, operating, maintaining, repairing, calibrating, tuning, and adjusting night vision devices to include, but not limited to, standard night optical devices, white phosperous night optical devices, and thermal systems or sights
- Proficiency with Microsoft Office (Word, Outlook, Excel, PowerPoint)
- Clear and effective verbal and written communication
Location & Eligibility
Where is the job
Fort Bragg, US
On-site at the office
About this job
- Posted
- 55 days ago
Listing Details
- Posted
- September 18, 2026
- First seen
- November 12, 2026
- Last seen
- November 12, 2026
Posting Health
- Days active
- 0
- Repost count
- 0
- Trust Level
- 20%
- Scored at
- November 12, 2026
Signal breakdown
freshnesssource trustcontent trustemployer trust
External application
4 other jobs at
View all →Similar Production Technician jobs
View all →Browse Similar Jobs
Production Associate3kManufacturing Engineer2.2kMachine Operator2.1kQuality Manager1.7kQuality Technician1.4kProduction Supervisor1.3kMachinist1.1kProduction Operator654Production Manager545Industrial Engineer537Process Technician336Production Engineer287Assembly Technician275Plant Manager274Press Operator262Manufacturing Supervisor207Industrial Maintenance Technician184Maintenance Planner154Cnc Operator143Cnc Programmer141
Newsletter
Stay ahead of the market
Get the latest job openings, salary trends, and hiring insights delivered to your inbox every week.
A
B
C
D
No spam. Unsubscribe at any time.