22h ago
New

Lead Plastics Technician

Cosmo-Zaflead
Other
1 views0 saves0 applied

Quick Summary

Overview

Greif is a global leader in performance packaging located in 40 countries. The company delivers trusted, innovative,

Technical Tools
Other

To Be the Advantage That Helps Our Customers Win. 

 

Creating packaging solutions for life’s essentials. 

035960 Lead Plastics Technician (Open)

Responsibilities

~1 min read

·       Fit and change blow moulding tools on BEKUM, FKI, KAUTEX, SIKA and other machines allocated to the site, following approved procedures and safe lifting practices.

·       Set up and optimise machines for HDPE products, including top and bottom blowing where applicable, against approved process parameters, cycle times and quality specifications.

·       Set up and troubleshoot ancillary systems, including SFDR, PWDS, MOOG controls, timers, sensors, conveyors, leak testers, weight checkers and camera systems, as applicable.

·       Measure mould changeover times against agreed standards, correct mould-related non-conformities and complete the mould change handover record with Production.

·       Verify machine settings at the prescribed frequency. Coordinate first-off approval with Production and Quality before releasing production after changes or interventions.

·       Respond promptly to process deviations, eliminate lumps and minimise start-up scrap and material waste. Escalate faults that cannot be resolved safely or within delegated authority.

·       Diagnose electrical, mechanical, hydraulic, pneumatic and process faults within demonstrated competence and authorisation, working with Maintenance on repairs and safe restoration of equipment.

·       Complete assigned preventive maintenance and inspections; identify deteriorating components and communicate spares and repair requirements to the responsible manager.

·       Use structured problem-solving and root cause analysis to address recurring failures. Record technical activities, downtime causes and corrective actions accurately in SHOPWARE.

·       Participate in the approved standby and callout roster and provide technical support in accordance with agreed working arrangements.

·       Comply with Greif safety rules, risk assessments, isolation and LOTOTO procedures, machine guarding requirements and safe mould handling practices. Do not bypass safety devices.

·       Use required PPE and safe tools; maintain tool accountability, housekeeping and 5S. Stop unsafe work and report hazards, defective tools and equipment promptly.

·       Maintain product traceability and applicable product, UN certification and quality requirements. Contain suspect product and obtain the required clearance before restart or release.

·       Coordinate day-to-day technical priorities with the SHEQ and Technical Manager, Production supervisors, Maintenance and Quality; provide clear shift handovers and escalate unresolved risks.

·       Coach plastic technicians and setters, assess practical competence and support training plans. Develop and update standard operating procedures and machine setting standards.

·       Monitor work quality and compliance with procedures. Address performance concerns through coaching and refer formal matters to the responsible manager and HR.

·       Lead practical improvements to cycle time, changeovers, equipment reliability and scrap, without compromising safety or product quality.

·       Start, stop and set machines, change moulds and set ancillary equipment within approved procedures, competency and delegated authority.

·       Stop unsafe operations and identify, reject or place non-conforming product on hold in accordance with quality procedures. Product release remains subject to designated approval.

·       Direct allocated technical work and monitor standards. Exercise formal supervisory or disciplinary authority only where specifically delegated under company procedures.

·       Escalate breakdowns, safety risks, quality failures and resource constraints. Obtain approval for overtime, expenditure and changes outside authorised process limits.

Requirements

~2 min read

·       Matric and a recognised Millwright or Electromechanician trade qualification. A trade-tested Electrician with demonstrated mechanical and blow moulding competence may be considered following a technical suitability assessment.

·       At least seven years’ hands-on experience as a blow moulding setter or technician, including substantial HDPE extrusion blow moulding setting, troubleshooting and process optimisation experience.

·       Demonstrated ability to lead complex setups, resolve recurring technical faults and coach other technicians. Ability to interpret technical drawings, manuals and electrical schematics relevant to the role.

·       Effective spoken and written English for communication with management, technicians and production teams; ability to write clear SOPs, handovers and technical reports.

·       Computer literacy in Excel, Word and Outlook, with the ability to use SHOPWARE or learn the site system. Strong practical problem-solving, planning and coordination skills.

·       Own reliable transport and availability for the agreed working pattern and rotational standby and callouts. Approved overtime is paid under the applicable employment arrangements.

At Greif, we believe that our colleagues are the center of our success. Our Total Rewards have a comprehensive focus on well-being and offer a competitive package that enables you to thrive, be engaged, and reach your full potential. 

Protect Yourself From Scams: We value the integrity of our recruitment process and prioritize the well-being of our candidates. While you may find Greif job postings on various platforms, all legitimate opportunities can be verified on our official Careers page at www.greif.com. All communication from Greif regarding job opportunities will also come from an @greif.com email address. If you have concerns about the legitimacy of a job posting, receive an unsolicited job offer or suspect fraudulent activity, please contact us for verification via this link Contact Us - Greif.

Nice to Have

~1 min read

·       Experience on BEKUM, KAUTEX, UNILOY, SIKA or FKI machines, or comparable extrusion blow moulding equipment.

·       Advanced Blow Moulding Fundamentals training through the Plastics Federation of South Africa or equivalent training and demonstrated competence.

https://www.greif.com/wp-content/uploads/2023/04/HR-101-Equal-Employment-Opportunity-Policy-English.pdf

We offer a competitive salary, excellent benefits and opportunity for growth. Greif is an equal opportunity employer. We will not discriminate against any applicant or employee on the basis of sex, race, religion, age, national origin, color, disability, veteran status or any other any other legally protected characteristic.

For more information read Greif’s Equal Opportunity Policy.

Location & Eligibility

Where is the job
Cosmo-Zaf
On-site at the office
Who can apply
Same as job location

About this job

Posted
Today
Employer
has 586 open jobs on Jobera.

Listing Details

Posted
November 18, 2026
First seen
November 18, 2026
Last seen
November 18, 2026

Posting Health

Days active
0
Repost count
0
Trust Level
56%
Scored at
November 18, 2026

Signal breakdown

freshnesssource trustcontent trustemployer trust
Newsletter

Stay ahead of the market

Get the latest job openings, salary trends, and hiring insights delivered to your inbox every week.

A
B
C
D
Join 12,000+ marketers

No spam. Unsubscribe at any time.

Lead Plastics Technician