Senior Fabricator/Pipe Welder
Quick Summary
Read and interpret fabrication drawings, advanced assembly drawings, isometric sketches, P&IDs, bills of materials, engineering specifications, approved WPSs, and applicable quality documents.
The Senior Fabricator is someone who independently fits, welds, assembles, tests, and supports the fabrication and assembly of process equipment manufactured LFG Specialties, an OEM that specializes in landfill gas compliance and processing equipment (i.e., flares, evaporators, gas handling systems). The role requires advanced pipe fitting and welding on carbon steel, 304 and 316 stainless steel, and carbon-to-stainless dissimilar-metal joints using approved Welding Procedure Specifications for SMAW, GTAW, and GMAW. Nearly all work is performed in the Findlay fabrication shop, with limited field installation and repair assignments.
Responsibilities
~2 min read- →Read and interpret fabrication drawings, advanced assembly drawings, isometric sketches, P&IDs, bills of materials, engineering specifications, approved WPSs, and applicable quality documents.
- →Lay out, measure, mark, cut, bevel, fit, tack, and weld pipe and fabricated components to released drawings, specified tolerances, and approved procedures.
- →Fit and weld pipe from 1-1/2 through 36 NPS, including Schedule 10S and STD or Schedule 40, in fixed positions and on welding positioners.
- →Perform SMAW, GTAW, and GMAW on carbon steel, 304 and 316 stainless steel, and qualified carbon-to-stainless dissimilar-metal joints.
- →Use specified filler metals, including nickel-alloy filler metals when required by the WPS, and follow applicable filler-metal handling and control requirements.
- →Perform stainless-steel purge welding for gas and process service, and apply weld sequencing and fit-up practices that control heat input, distortion, and dimensional change.
- →Fabricate pipe spools, structural assemblies, and tanks associated with the product lines manufactured at this facility, including assembly.
- →Set up and operate the plasma table after completing required equipment training.
- →Operate plate-rolling and forming equipment, including the shop's 4-roll machine, after completing required training and demonstrating safe operation.
- →Conduct and document pneumatic or hydrostatic tests independently with guidance from the supervisor and in accordance with the approved test procedure.
- →Prepare welds and fabricated assemblies for inspection and assist qualified inspection personnel with visual testing, liquid penetrant testing, and other required NDE activities.
- →Assist with weld maps, shop travelers, material traceability, heat-number records, material test reports, filler-metal control records, pressure-test records, and other quality documentation.
- →Take field measurements, prepare accurate as-built redlines, and perform final fit-up during occasional field installation or repair assignments.
- →Identify fabrication conflicts or value-engineering opportunities and work with engineering and quality personnel to obtain approval before changing released requirements.
- →Mentor junior fabricators and welders, demonstrate sound work practices, and provide constructive technical guidance as part of the shop's development culture.
Requirements
~6 min read- High school diploma, GED, or an equivalent combination of education and relevant experience.
- At least five years of progressive fabrication, pipe fitting, and pipe welding experience.
- Demonstrated proficiency with SMAW, GTAW, and GMAW processes.
- Demonstrated experience fitting and welding carbon steel and 304 or 316 stainless steel, including carbon-to-stainless dissimilar-metal joints.
- Demonstrated ability to fit and weld NPS 1-1/2 through NPS 36 pipe, including Schedule 10S and STD or Schedule 40, in fixed positions and on a positioner.
- Advanced ability to read fabrication drawings, isometrics, P&IDs, bills of materials, tolerances, WPSs, and inspection requirements.
- Working knowledge of stainless-steel purge practices, weld preparation, joint fit-up, weld sequencing, distortion control, dimensional inspection, and pressure-test documentation.
- Ability to conduct hydrostatic testing with supervisor guidance and to prepare work for inspection and NDE.
- Ability and willingness to operate a plasma table, plate-forming equipment, positioners, and related shop equipment after required training.
- Ability to mentor less-experienced employees while maintaining production, quality, and safety expectations.
- Valid driver's license and ability to travel for occasional field assignments lasting one to two weeks.
- Ability to satisfy applicable background screening, drug testing, client badging, and site-access requirements in accordance with company policy and applicable law.
- Successful completion of the weld tests described below.
- Work primarily in an industrial fabrication shop and occasionally at outdoor or active industrial field sites.
- Stand and walk for extended periods and regularly reach, grasp, handle tools and materials, bend, stoop, kneel, and crouch. The work may include prolonged kneeling or crouching and occasional climbing, balancing, and crawling.
- Occasionally lift and carry up to 50 pounds. Use team lifting or approved mechanical handling equipment for heavier, bulky, or awkward loads.
- Work at elevation and use ladders, platforms, scaffolds, or personal fall-protection systems after required training and authorization.
- Enter confined spaces when assigned, trained, authorized, and covered by the applicable entry procedure.
- Wear a respirator when required after medical evaluation, fit testing, and training.
- Work around welding arc radiation, sparks, hot surfaces, sharp edges, moving equipment, noise, dust, welding fumes, shielding gases, and variable temperatures.
- Work outdoors during occasional field assignments in heat, cold, wind, precipitation, and other site conditions.
- Wear required PPE, which may include a welding helmet, safety glasses, face shield, hearing protection, protective clothing, gloves, safety-toe footwear, fall protection, and respiratory protection.
- Work the regular Monday-through-Thursday schedule from 6:00 a.m. to 4:30 p.m., work overtime when required, and travel overnight a few times per year for assignments that may last one to two weeks.
- Follow approved WPSs, released drawings, quality procedures, inspection hold points, and supervisor or quality direction. Do not change weld variables, materials, joint details, or released dimensions without approval.
- Comply with Job Hazard Analyses, Lockout Tagout, hot-work permits, fire-watch requirements, confined-space procedures, fall-protection requirements, respiratory-protection requirements, and site-specific rules.
- Complete company-provided training for hot work, confined-space entry, fall protection, respiratory protection, forklifts, overhead cranes, rigging, plasma-table operation, and plate-forming equipment as assigned.
- Use correct material and filler-metal identification and assist with traceability, weld mapping, inspection, test records, and nonconformance documentation.
- Inspect fit-up and completed work for dimensional accuracy and visible defects, protect finished components, and present work for required quality hold points.
- Maintain an orderly work area and care for assigned tools, welding equipment, fixtures, and material-handling equipment. Stop work when equipment, conditions, or instructions create an uncontrolled hazard or quality risk.
- Previous welder performance qualifications and experience in an ASME code-controlled fabrication environment.
- Experience supporting pressure-vessel fabrication under ASME Section VIII and process-piping fabrication under ASME B31.3.
- Experience following ASME Section IX WPSs and supporting welder qualification, weld traceability, and inspection documentation.
- Experience operating a 4-roll plate-forming machine capable of rolling plate up to 10 feet wide and 1/2 inch thick.
- Previous experience with plasma-table operation, overhead cranes, forklifts, rigging, and material handling.
- Field installation, repair, measurement, and final fit-up experience on industrial equipment.
Passing the company-required weld tests is a condition of consideration and must be completed before an employment offer is made. Candidates must successfully complete employer-specified 2G and 6G performance qualification tests using the applicable company WPSs qualified in accordance with ASME Section IX. An independent testing laboratory will administer or evaluate the tests using visual examination and bend testing. Specific test variables and procedures will be provided to candidates by the company.
Previous welder performance qualifications or certifications are a strong plus because they demonstrate past performance, but they do not replace the company-required tests. Employees must maintain required qualification continuity and complete periodic requalification after hire as directed by the company.
- Welding power sources and accessories for SMAW, GTAW, and GMAW; purge equipment; welding positioners; and common weld-fixturing tools.
- Plasma table, hand plasma cutter, oxy-fuel equipment, band saws, chop saws, drill press, magnetic drill, grinders, sanders, and other fabrication tools.
- 4-roll plate-forming machine and related material-handling equipment following company qualification and training.
- Tape measures, calipers, levels, squares, angle finders, layout tools, bolt-circle measurements, and torque tools.
- Advanced blueprint and isometric reading, pipe layout, joint preparation, fit-up, stainless-steel purging, dimensional control, and as-built redlining.
- Working awareness of inspection hold points, visual acceptance requirements, liquid penetrant testing, material traceability, pressure testing, and nonconformance reporting.
About APTIM
APTIM enhances the quality of the environment, wellbeing of people, resilience of communities, and opportunity for employees to make a difference, not just a living. A leading professional solutions firm, we specialize in environmental, sustainability, resilience, and infrastructure solutions. Our team of experts provide these integrated solutions for forward-thinking government agencies, commercial and industrial clients, and energy customers. Together, we create sustainable and resilient communities for all.
What you can expect from APTIM:
- Work that is worthy of your time and talent
- Respect and flexibility to live a full life at work and at home
- Dogged determination to deliver for our clients and communities
- A voice in making our company better
- Investment into your personal and professional development
As of the date of this posting, a good faith estimate of the current pay range for this position is $32.00 - $35.00 Per Hour. Compensation depends on several factors including: experience, education, key skills, geographic location of the position, client requirements, external market competitiveness, and internal equity among other employees within APTIM.
Employee Benefits
APTIM Environmental & Infrastructure, LLC is committed to providing an extensive range of benefits that protect and promote the health and financial well-being of our employees and their families through the APTIM Benefits Marketplace https://aptim.makeityoursource.com/.
- Medical, vision, and dental insurance: Through the marketplace, our employees can choose benefits from five metallic levels and several carriers to find the right benefits that work for them in their location.
- Company paid and optional Life insurance
- Short-term and long-term disability insurance
- Accident, Critical Illness, and Hospital Indemnity coverage
- Paid holidays, vacation, and sick leave (eligibility based on company policy and applicable law)
- 401(k) APTIM offers three 401k plans through the Aon Pooled Employer Plan (PEP). The specific plan you are eligible for depends on the business unit you are in. The details of the largest plan are found here:
Location & Eligibility
About this job
- Pay per year
- ≈ $66,560–$72,800 a year
- 40% above the $49,920 median for Fabricator jobs on Jobera (47 salaries).
- Who can apply
- United States
- Posted
- Today
Listing Details
- First seen
- November 18, 2026
- Last seen
- November 18, 2026
Posting Health
- Days active
- 0
- Repost count
- 0
- Trust Level
- 68%
- Scored at
- November 18, 2026
Signal breakdown
Browse Similar Jobs
Stay ahead of the market
Get the latest job openings, salary trends, and hiring insights delivered to your inbox every week.
No spam. Unsubscribe at any time.