lloydrichards

The position would require maintaining current die sets, reading prints, manual machine work, some CNC mill work, surface grinding, building new die sets, etc. Work hours would be 7:00 am to 3:30 pm Monday through Friday, some overtime possible but not usual. Pay rate would start around $25/hr. or m

East Tulsa warehouse needs Parts PullerWill be pulling orders for nuts, bolts, rivetsMust be able to operate a forkliftMust be able to lift 30lbs+5:00-3:30 Monday-Thursday

Broken Arrow needs Drywall Mixer2nd shift 2:30-11:30 possible 12:30 with overtimePouring drywall mix into a hopperWatching all the gaugesMaking sure the mixture is the right consistencyWhen mixture is complete it will poured into bags or buckets$17.00hr

Power Coating company needs CoaterMust be able to operate a Nordsen Color Max II BoothMust be able to make up to 10 color changes a dayMust be able to adjust the gunBilingual a plus but not necessary5am-2pm Monday-Friday

MUST BE ABLE TO RIN A NORDSEN COLOR MAX II BOOTH. PAYING UP TO $35.00 HR BASED ON EXPEREINCE. MUST BE ABLE TO MAKE UP TO 10 COLOR CHANGES, MUST BE ABLE TO ADJUST THE GUN. BILINGUAL A PLUS BUT NOT REQUIRED. WORK HOURS: 5:00AM-2:00PMWEST TULSA AREA.

North Tulsa Brick company needs Stick, Mig and Tig WelderWill be repair welding for kiln cars and other equipment in the shopMust be able to read schematics/blueprintsMust be able to read a tape measure6am-2:30pmStarting $17 or based on experience

Sand Springs Louver company needs AssemblerMUST BE ABLE TO READ A TAPE MEASUREMust be mechanically inclinedWill be cleaning the shop, sweeping, picking up debris and sorting metalMust be able to stand for long hours, bending, stoopingMUST HAVE OWN VEHICLE6am-4:30 Monday-Friday $15.00hr to start

EXPERIENCED COMMERICAL DIESEL TIRE TECHNICIAN. NOT REGULAR TIRE TECH. MUST HAVE WORKED ON DIESEL TRUCKS, FRONT END LOADERS, FORKLIFTS. ETC. NEED TO HAVE DONE ALL THESE. $18.00 HR. DAY SHIFT 7:00AM-3:30PM MONDAY-FRIDAY.NORTH TULSA FACILITY

North Tulsa Scrap Yard needs Commercial TechThis is not a regular tire techMUST HAVE COMMERCIAL TIRE EXPERIENCEMust have worked on Diesel Trucks, Front End Loaders, Forklifts$18.00hr8am-4:30

Crate Building company at the Port of Catoosa needs case builderMUST BE ABLE TO READ A TAPE MEASUREMust be able to standMust be able to operate a rivet gun. they can teach but if you cannot hold a power tool then this job is not for youMust be able to lift 50lbsMust be able to work Overtime when req

North Tulsa Manufacturing company needs Forklift/Shipping Helper This is a larger, ride-on forklift5:00am-1:30pm Monday-Friday with overtime and a Saturday morning shift as neededWill be moving material in the yardLoading and unloading trucks

Transfer kiln cars in and out of the burners Monitor the kiln for adjustments Make changes to temperature as needed Change the burners Monitor brick qualitySkills and Experience Required for Success 1+ years of relevant experience Must be computer literate Must be a problem solver with the ab

Summary/Objective SANDBLASTER$19-$21 HR. SAND SPRINGSThe Sandblaster operates specialized tools and machinery that fire high-powered jets of sand or other abrasives at metal and other similarly hard surfaces to remove paint, grime, old adhesives, rust and other imperfections from material to be pain

Sapulpa Heat Exchanger/Pressure Vessel shop needs Radial Drill OperatorMechanically inclinedOverhead crane a plusCan trail the right person6am-2:30$17.00-$18.00 DOE

Job Title: Accounts Receivable Specialist $17.50-$23.00 HR.Department: OfficeSummary: Perform a wide range of administrative and office support activities for the department and/or managers and supervisors to facilitate the efficient operation of the organization.Duties and Responsibilities: Assist

SAPULPA METAL FABRICATION SHOP IS LOOKING FOR EXPRIENCED 2ND SHIFT SUPERVISOR FOR TUBE ROLLING/ASSEMBLY. MUST HAVE EXPRIENCE IN AIR COOLED HEAT EXCHANGER INDUSTRY.$34.00-$36.00 HR AND $2.00 NIGHT DIFFERENTIAL.APPLY IN PERSON WITH RESUME ATLLOYD RICHARDS PERSONNEL4619 S. HARVARD AVE. SUITE 105TULSA,

Day ShiftPay – DOEThis position will spend 50% of their time conducting and maintaining ISO audits, system audits, maintain all related documentation and training, etc.And the other 50% of their time performing hands on inspection of parts that involved welding, fit up, machining, forming, assembly,

5 + YR EXP. INDUSTRIAL PAINTER IN CLAREMORE FACILITY. EPOXIES, ZINCS, URATHANES, ENAMELS. CONVENTIONAL POT

1st and 2nd shift laser operator position, any candidate should know how to read a tape measure, read calipers, prints and be able to stand for long periods of time in a shop that is not environmentally controlled and be able to pick up 50lbs. I would like to see some steel or industrial shop experi

EAST TULSA COMPANY LOOKING FOR INDUSTRIAL PAINTER $27-$30 HR.MUST HAVE FABRICATION OR MANUFACTURING PAINTING ENVIROMENT. MUST KNOW HOW TO MIX AND SPRAY EPOXIES, URATHANES, ZINCS, ENAMELS WITH NO RUN AND NO OVERSPRAY. CONVENTIONAL POTS