Worksite Safety Supervisor (WSS)
Quick Summary
Job Description // var rmkColors = []; rmkColors.push( { colorId:"022ad00d", type: "solid", hexcolor1:"#EFF1F2", hexcolor2:"" }); rmkColors.push( { colorId:"06bfc6741a3105db", type: "solid",
The Worksite Safety Supervisor (WSS) is responsible for the safe establishment, protection, access control, and supervision of defined worksites within MMSP construction railway operations. Working under the operational authority of the Rail Movement Controller (RMC), the role ensures that worksite activities comply with the Construction Commissioning Rail Rule Book (CCRRB), approved Permit to Work (PTW) arrangements, and project procedures.
The WSS coordinates Work Party Supervisors (WPS), contractors, and rail vehicle interfaces within the assigned worksite across the Mainline, stations, and associated work fronts, and supports Depot activities within the applicable control arrangements.
Responsibilities
~1 min read- Accept and record worksite authority from the RMC, confirming the exact limits, duration, operational status, restrictions, and any delegated authority.
- Establish and maintain approved worksite boundaries, protection, access points, safe walking routes, and places of safety before admitting work parties.
- Verify valid PTWs, approved Risk Assessments and Method Statements (RAMS), and required isolation confirmations from authorised persons before work starts.
- Brief WPSs on worksite limits, hazards, protection, movement restrictions, places of safety, communications, and emergency arrangements.
- Prevent work from starting or continuing where authority, protection, isolation status, or safe working conditions cannot be confirmed.
- Control entry to and exit from the worksite, verifying identity, induction, relevant competence, and authority to access the permitted work area.
- Maintain a current sign-in and sign-out register and reconcile personnel present with WPSs and designated access-control personnel.
- Coordinate concurrent work parties and adjacent interfaces within approved PTW conditions; refer conflicts or proposed changes to the PTW Manager and RMC.
- Monitor worksite conditions and compliance with briefed controls; stop unsafe activity and ensure affected personnel reach a place of safety.
- Maintain safety-critical communication with the RMC,WPSs, drivers, operators, shunters, and points operators.
- Manage the interface between personnel, Works Trains (WT), Road Rail Vehicles (RRV), and plant within the assigned worksite.
- Control local movements only within formally recorded delegated authority; obtain RMC authority for entry, exit, and movements outside those limits.
- Confirm routes, points status, clearances, personnel protection, and conflicting activities before authorised movements; stop if conditions or communication are unclear.
- Monitor compliance with the CCRRB, PTW conditions, worksite procedures, and project safety requirements within the assigned area.
- Stop affected work or movements when protection, communication, access, or other safety controls fail, and notify the RMC immediately.
- Implement briefed emergency arrangements, account for personnel, report missing or injured persons, and coordinate safe withdrawal with the RMC.
- Report incidents, near misses, breaches, and defects promptly; support investigations and implement assigned corrective actions.
- Maintain accurate records of briefings, worksite status, access, protection, communications, and operational decisions.
- Complete a recorded shift handover covering limits, authority, protection, active permits, personnel, rail vehicles, restrictions, and outstanding issues.
- Obtain confirmation from each WPS that all personnel are accounted for and tools, plant, and materials are clear or left in an authorised safe condition.
- Verify the line, points, clearances, and access routes are fit for the intended use; remove protection only under the authorised closing arrangement.
- Formally offer the worksite back to the RMC, reporting residual defects or restrictions, and retain control until the RMC positively accepts handback.
- Certificate, diploma, or recognised qualification in railway operations, construction, engineering, or a related discipline; relevant experience may be considered in lieu.
- Minimum 3 years' experience in railway construction, track access, worksite protection, or another relevant safety-critical operational environment.
- Demonstrated experience supervising protected worksites and coordinating work parties alongside rail vehicle or plant movements.
- Sound knowledge of PTW controls, worksite protection, risk assessment, safety-critical communications, and emergency arrangements.
- Ability to interpret track layouts and worksite plans, maintain accurate records, and use radios and electronic permit systems.
- Strong written and verbal English communication skills, sound judgement, and the confidence to stop unsafe work.
Location & Eligibility
About this job
- Who can apply
- Philippines
- Posted
- Today
Listing Details
- First seen
- November 20, 2026
- Last seen
- November 20, 2026
Posting Health
- Days active
- 0
- Repost count
- 0
- Trust Level
- 56%
- Scored at
- November 20, 2026
Signal breakdown
Browse Similar Jobs
Stay ahead of the market
Get the latest job openings, salary trends, and hiring insights delivered to your inbox every week.
No spam. Unsubscribe at any time.