Quick Summary
Turn the requirements into a chassis design, and decide where off-the-shelf components fit and where a custom design pays off. Take parts from CAD to hardware with machine shops and suppliers.
Ownership: You will co-own the chassis hardware and decide on the best balance of design tradeoffs to meet the requirements. Speed: You will see your designs built,
Zendar is looking for a Mechatronics Engineer to join our Lindau am Bodensee office and build the hardware of our autonomous outdoor robot. The robot carries our radar-centric autonomy stack, works around the clock, docks itself and charges wirelessly. You will design, build and bring up its chassis, from the mechanics and electronics to the firmware that runs them.
This is a unique opportunity to join a small team that is not bogged down by legacy designs. You will take the robot from hand-built prototypes to a product that is ready for customers.
Zendar builds physical agents: mobile robots that can go anywhere in the physical world, understand what they see and act on it. We are deploying them to automate enterprise sites, doing in the physical world what AI agents already do in software.
What makes our robots special is the navigation foundation model for autonomous systems that Zendar has developed over the past 9 years. Our radar-centric autonomy stack lets mobile robots traverse any environment, from offices and warehouses to roads, in any weather and at high speeds. Our physical agents get wherever they need to go, quickly, reliably and safely.
We are a small team that owns the whole stack, from sensors and perception to planning, AI and the robots in the field. We are scaling deployments rapidly, so you will see your work running on real robots at real sites and delivering value to our customers.
Although AI is central to what we build, our hiring process is intentionally human: every resume is reviewed by a real person.
As a Mechatronics Engineer in Lindau, you will join our robot hardware team and co-own the chassis of our outdoor robot: its mechanics, electronics and firmware. You will work hand in hand with our robot hardware engineer in Berkeley, from the first CAD model and wiring diagram to a robot that drives, docks and charges outdoors. Occasional travel to the US may be required.
You will work closely with the autonomy, embedded software and systems engineering teams, and with our suppliers. Your test results will feed directly into the requirements and design of the next robot generation.
- Ownership: You will co-own the chassis hardware and decide on the best balance of design tradeoffs to meet the requirements.
- Speed: You will see your designs built, powered up and driving within weeks, not years.
- Impact: Your decisions shape a robot that moves from prototype to customer deployments.
Responsibilities
~1 min read- →Build the Chassis:
- →
- →Turn the requirements into a chassis design, and decide where off-the-shelf components fit and where a custom design pays off.
- →Take parts from CAD to hardware with machine shops and suppliers.
- →Make the robot robust outdoors and easy to service.
- →Own the Electrical System and Firmware:
- →
- →Design and build the power distribution and wiring of the robot, from schematic to finished harness.
- →Write, extend and debug the firmware that runs the chassis electronics, together with our embedded engineers.
- →Specify or design custom boards where off-the-shelf electronics fall short.
- →Bring Up and Test:
- →
- →Take each new robot from first power-on to driving outdoors, debugging across mechanics, electronics and firmware.
- →Plan and run tests that show the robot meets its requirements, on the bench and in the field.
- →Get to Product:
- →
- →Keep the hardware documentation up to date, so the next robot is built faster.
- →Work with suppliers to make the chassis manufacturable, serviceable and ready for certification.
- BSc or MSc in Mechatronics, Mechanical or Electrical Engineering, or a related field
- 3+ years of hands-on experience building and bringing up electromechanical systems such as mobile robots, vehicles, e-bikes or scooters
- Mechanical design in 3D CAD, including drawings for sheet-metal, machined and 3D-printed parts
- Practical electrical skills: schematics, wiring harnesses, crimping and soldering, and low-voltage DC power systems (12 V to 48 V)
- Fluency in embedded firmware: writing and debugging C/C++ on microcontrollers
- Experience with electric motors and motor controllers, lithium batteries with a BMS, and CAN bus
- Ability to narrow down problems that cross electrical, mechanical and firmware domains, using a multimeter, an oscilloscope, a lab power supply and a CAN analyzer
- Strong communication skills and the drive to own hardware in a small team, in the shop and outdoors
Nice to Have
~1 min read- Experience taking an outdoor robot or vehicle from prototype to small-series production
- Functional safety for machines: emergency stop chains, safe torque off, safety controllers (ISO 13849)
- Battery integration and charging, including wireless charging
- PCB design in KiCad or Altium, and Python for bring-up and test tools
- Designing for IP ratings, EMC and vibration, and working with test labs on certification
- Design for manufacturing and assembly, and managing suppliers and their lead times
What We Offer
~1 min readLocation & Eligibility
About this job
- Pay per year
- €85,000–€105,000 a year
- Who can apply
- Germany
- Posted
- Today
Listing Details
- First seen
- November 17, 2026
- Last seen
- November 17, 2026
Posting Health
- Days active
- 0
- Repost count
- 0
- Trust Level
- 71%
- Scored at
- November 17, 2026
Signal breakdown
Similar Mechatronics Engineer jobs
View all →Browse Similar Jobs
Stay ahead of the market
Get the latest job openings, salary trends, and hiring insights delivered to your inbox every week.
No spam. Unsubscribe at any time.
