Manager - Electrical Engineering - Ports & Terminals - Nhava Sheva

Carry out routine checks and inspections and Analyse test results and recommend corrective measures of: 

• Power transformers – oil level, temperature, silica gel, OLTC operations, cooling fans, radiators.

• HV/MV circuit breakers – VCB, ACB, SF6, GIS.

• CTs, PTs, surge arresters, isolators, bus systems.

• HV/LV switchgear, protection panels, and control wiring.

• Transformer IR, Tan delta, BDV, DGA (Dissolved Gas Analysis), winding resistance. 

• Breaker timing tests, contact resistance, insulation resistance.

• Thermography for hotspots on cables, busbars, panels.

Fault Analysis, Troubleshooting & Repair

• Respond to electrical breakdowns in substations and carry out root‑cause analysis. 

• Diagnosed faults related to: 

• Protection relay trips

• Transformer alarms or abnormal conditions

• Breaker malfunctions

Vendor Management & Spares

• Coordinate with OEMs for servicing major equipment. 

• Maintain stock of relays, breaker spares, transformer accessories, and critical components.

• Units consumed (kWh / kVAh)

• MD charges

• TOD slabs (if applicable)

• Power factor incentives/penalties

• Wheeling & cross-subsidy charges

• Electricity duty and taxes

• Actual substation meter readings
• HT metering logs
• TOD consumption breakdown
• Overbilling
• Incorrect tariff application

Verify HT Electricity bills thoroughly: 

Cross-check billing with: 

Identify anomalies such as: 

Safety, Arc‑flash Management & Compliance

Ensure compliance with: 

• CEA Regulations (as applicable to operation & maintenance of electrical installations)

• Ensure all substation equipment, installations, and work practices comply with the CEA Regulations.

• Statutory norms from CEIG and State Electricity Board

• IS/IEC/IEEE safety standards

• Lead safety audits, 

• HIRA/JSA preparation, and corrective actions.