14d ago
New

Senior Optical Design Engineer

FranceFrance·ToulouseFull-Timesenior
EngineeringDesign Engineer
3 views0 saves0 applied

Quick Summary

Overview

Ready to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place!

Technical Tools
EngineeringDesign Engineer

Ready to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place!

E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems.

We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life.


Overview
 
We are expanding our optomechanical capabilities, and the success of our projects depends on optical designs that are precise, manufacturable, and verified through rigorous analysis and testing. As a Senior Optical Design Engineer, you will own optical designs from concept through lab validation, turning requirements into lens designs and optical assemblies that perform reliably in the real world. This position is central to our mission of delivering cutting-edge free-space optical systems for space applications, and it will support successful pre-production runs and strong collaboration with our suppliers. This position reports to our Responsible Engineer, Optical Systems, and is based in our Toulouse, France office. Our working language is English. 
 
  • Design and optimize lenses and optical systems, from first-order layout to detailed optimization with ray tracing and physical optics propagation (POP). 

  • Carry out tolerance analysis and Monte Carlo simulations to predict manufacturing and assembly yield, and define realistic tolerances with suppliers. 

  • Conduct STOP (Structural-Thermal-Optical Performance) analysis with mechanical engineers, verifying performance and margins across operating conditions. 

  • Conduct stray light analysis. 

  • Produce lens and optomechanical drawings, and work with mechanical engineers to ensure designs are manufacturable and assemblable. 

  • Define assembly, alignment, and bonding procedures, and support their implementation in clean room environments. 

  • Plan and execute lab assembly and test, covering alignment, characterization, and performance verification of prototypes and flight-representative hardware. 

  • Characterize components and assemblies through optical metrology, and identify discrepancies. Drive root-cause investigations and design iterations. 

  • Work with suppliers on design for manufacturing, tolerancing, inspection, qualification, and pre-production runs.

  • A Master’s degree in Optical Engineering, Physics, or a related field, with a strong foundation in geometrical and physical optics. 

  • 5+ years of experience in optical design, including lens and optical system design, optimization and STOP analysis. 

  • Proficiency in Zemax OpticStudio, including sequential ray tracing and optimization. 

  • Hands-on lab experience in optical assembly and test, with working knowledge of metrology instruments such as interferometers, wavefront sensors, MTF benches, autocollimators, and centration measurement tools. 

  • Experience with spaceborne optics or qualification to space-relevant standards, such as ECSS. Selection of adhesives, coatings and optics materials. 

  • Strong analytical skills and the ability to troubleshoot problems across simulation and hardware. 

  • A proactive mindset and a commitment to high standards of quality and performance. 

  • Experience with free space optical communication systems. 

  • Python and ZOS-API skills for automating analysis or processing data. 

  • Experience with ANOVA methodology, including Gauge R&R studies and statistical post-processing in tools such as JMP. 

  • Practical knowledge of cleanroom practice, optics cleaning, adhesive bonding. 

  •  

    Location & Eligibility

    Where is the job
    Toulouse, France
    On-site at the office
    Who can apply
    FR

    About this job

    Who can apply
    France
    Posted
    14 days ago
    Employer
    has 100 open jobs on Jobera in 3 countries.

    Listing Details

    Posted
    November 3, 2026
    First seen
    November 16, 2026
    Last seen
    November 17, 2026

    Posting Health

    Days active
    0
    Repost count
    0
    Trust Level
    36%
    Scored at
    November 17, 2026

    Signal breakdown

    freshnesssource trustcontent trustemployer trust
    Newsletter

    Stay ahead of the market

    Get the latest job openings, salary trends, and hiring insights delivered to your inbox every week.

    A
    B
    C
    D
    Join 12,000+ marketers

    No spam. Unsubscribe at any time.

    Senior Optical Design Engineer