~41m ago
New

Quality Engineer

United StatesUnited States·Le Sueurmid
EngineeringQuality Engineer
2 views0 saves0 applied

Quick Summary

Overview

The Quality Engineer provides technical quality support for assigned aluminum casting processes and associated downstream operations. The role interprets customer and engineering requirements,

Technical Tools
EngineeringQuality Engineer

The Quality Engineer provides technical quality support for assigned aluminum casting processes and associated downstream operations. The role interprets customer and engineering requirements, characterizes nonconformances, establishes inspection and verification methods, analyzes process performance, and partners with Production and Engineering to prevent recurring defects. Quality Engineers support customer requirements and the quality management system while maintaining clear process ownership.

Essential Duties and Responsibilities

  • Serve as the primary quality engineering resource for the assigned casting process, following parts through machining, heat treatment, aging, finishing, nondestructive testing, and final inspection as applicable.
  • Review drawings, specifications, GD&T, acceptance criteria, and revision requirements; translate them into practical inspection plans, work instructions, and control methods.
  • Characterize nonconforming product, establish the extent of suspect material, support containment and disposition, and maintain clear, objective inspection evidence.
  • Analyze scrap, rework, X-ray and penetrant findings, dimensional trends, and recurring defects to identify process risks and improvement priorities.
  • Facilitate structured problem solving using 5-Why, Ishikawa/fishbone, 8D, and data analysis; support Production as the owner of process root cause and corrective action implementation.
  • Define and document verification criteria for corrective actions; confirm effectiveness before recommending closure of quality actions.
  • Support APQP, process flow diagrams, PFMEA, control plans, MSA, SPC, capability studies, first article inspection, and PPAP/customer submissions as applicable.
  • Support new product introduction and process changes, including inspection readiness, process validation, and risk identification before production release.
  • Develop and improve inspection methods, sampling strategies, receiving inspection instructions for subcontracted processing, and traceability/recordkeeping practices.
  • Coordinate with Manufacturing Engineering, Operations, laboratories, inspectors, and customer-facing quality leadership to resolve technical quality concerns.

  • Support supplier-related quality investigations where product quality is designed, verified, or affected; Purchasing and Engineering retain primary supplier relationship and development ownership.
  • Participate in internal/customer audits and support compliance with ISO 9001, customer-specific requirements, and applicable engineering standards.

Education and Experience:

  • Bachelor's degree in engineering, manufacturing, quality, or a related technical field preferred; equivalent relevant manufacturing experience considered.
  • Experience in manufacturing quality engineering, foundry operations, machining, or related industrial processes preferred.
  • Demonstrated ability to interpret technical requirements, analyze data, investigate nonconformances, and communicate findings clearly.
  • Ability to work effectively on the production floor and collaborate across Quality, Production, Engineering, and other functions.
  • Proficiency with spreadsheets, quality records, and standard business software.

Technical Knowledge:

  • Aluminum casting processes: high-pressure die casting, permanent mold/low-pressure permanent mold, and sand mold; working knowledge of process-specific defect mechanisms.
  • Casting and downstream operations including heat treatment, aging, machining, finishing, radiographic inspection, liquid penetrant inspection, and dimensional verification.
  • Reading engineering drawings and applying GD&T; familiarity with ASME, ASTM, AMS/SAE, ISO, MIL, and customer specifications as applicable.
  • Quality tools including 8D, 5-Why, fishbone, SPC, MSA, PFMEA, control plans, capability analysis, and PPAP/FAI.

Inspection and measurement methods including hand gages, CMM/scanning outputs, laboratory testing, and NDT results; specialist certification is not inherently required.

Location & Eligibility

Where is the job
Le Sueur, United States
On-site at the office
Who can apply
US

About this job

Who can apply
United States
Posted
Today
Employer
has 29 open jobs on Jobera.

Listing Details

First seen
November 18, 2026
Last seen
November 18, 2026

Posting Health

Days active
0
Repost count
0
Trust Level
56%
Scored at
November 18, 2026

Signal breakdown

freshnesssource trustcontent trustemployer trust
Newsletter

Stay ahead of the market

Get the latest job openings, salary trends, and hiring insights delivered to your inbox every week.

A
B
C
D
Join 12,000+ marketers

No spam. Unsubscribe at any time.

Quality Engineer